Compact Digital Multimeter
-
Detail
This Sper Scientific Digital Multimeter is a compact, full-featured multimeter that fits nicely in your palm.
An easy to use unit that delivers safe, reliable measurements, time after time. These meters are made to fit the way you work, and designed to go along no matter where your work takes you.
They feature a large, crisp backlit LCD display, making it easier to work in dark environments. Virtually everything you need to measure is available in these meters, including test settings for 1.5V and 9V batteries. These meters conform to EN 61010-1, CAT-III 600V standards. The double molded housing provides a safe grip, and the meter features full overload protection.
9V battery, test leads and instructions are included. One year warranty.
Specifications
Diode Test
Test current of 1mA maximum, open circuit voltage 2.8V DC typical
Continuity Check
Audible signal will sound if the resistance is less than approximately 30Ω
Battery Test current
9 V (6mA); 1.5V (100mA)
Input Impedance
>1MΩ
Data Hold
To Freeze the displayed data
ACV Bandwidth
45 Hz to 450Hz
DCA voltage drop
200 mV
Display
3 ½ digit, 2000 count Backlit LCD, 1.1” digits
Overrange indication
“1” is displayed
Polarity
Automatic (no indication for positive polarity); Minus (-) sign for negative polarity
Measurement Rate
2 times per second, nominal
Low Battery Indication
“BAT” is displayed if battery voltage drops below operating voltage
Battery
one 9-volt (NEDA 1604) battery
Fuses
mA, µA ranges; 0.2A/250V fast blow
A range; 10A/250V fast blow
Operating Temperature
32 °F to 122°F (0°C to 50°C)
Storage Temperature
-4 °F to 140°F (-20°C to 60°C)
Relative Humidity
Operating Altitude
7000ft. (2000) meters maximum.
Weight
255g
Size
150mm x 70mm x 48mm
Safety
For indoor use and in accordance with Over-voltage Category II, Pollution Degree 2. Category II includes local level, appliance, portable equipment, etc., with transient over-voltages less than Over-voltage Category III.
Downloads
-
Customer ReviewsNo comments