Home
/
PDM509S | Analog Insulation Tester 500V / 100MΩ Single Range
PDM509S | Analog Insulation Tester 500V / 100MΩ Single Range
373
sold
Quantity
-
Detail
The Sanwa PDM509S is a single-range, lightweight, analog DC Insulation tester with an Auto discharge function.
The Sanwa PDM509S has an insulation resistance measuring range of 100MΩ/500 volts with an accuracy of ±5% of full scale. The instrument can also be used to measure AC (600V max) and DC (60V max) voltages as well.
The PDM509S comes with an Auto discharge function that discharges a test circuit once the user is done measuring the insulation resistance of the test circuit. This device lies in the EN61010-1 CAT.II (1000V) and EN61010-1 CAT.III (600V) measurement category.
- Test voltage DC500V
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- ACV measurement range
Includes meter, test leads, carrying case, strap and instruction manual.
Specifications
Scale(MΩ) 0.05~0.1~50~100MΩ Tolerance ± 5% of reading(1st effective measurement range : written in thick print above)
±10% of reading(2nd effective measurement range : written in small type above)ACV 600V Tolerance Within ±5% of the max. scale value(50~60Hz sine wave) DCV 60V Tolerance Within ±5% of the max. scale value Rated current 1.0~1.2mA Battery 6LF22/6LR61 (9V alkaline battery) x1 Size/Mass H144×W99×D43mm / Approx. 310g Safety standard IEC61010 CAT.Ⅲ 600V -
Customer ReviewsNo comments